Filter
Top Products
Applications:
Features and Benefits:
Tool Specifications:
Fastener Specifications:
The rugged-duty SENCO
®
SCN65XP Coil Nailer is light enough for
one-handed operation. It can hold up to 275 nails (depending upon nail
type) for maximum productivity in a wide variety of applications.
Item #: 540101N - Sequential actuation
Tool Weight: (Unloaded) 8 lbs. (3.6 kg)
Height: 14
1
⁄
8
" (359 mm)
Length: 12
7
⁄
8
" (327 mm)
Collation: Flat, angled coil wire
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Tool is avilable with either sequential or contact
actuation trigger mechanism.
Hose Fitting:
3
⁄
8
" NPT
For on-site, manufactured housing, including framing, sheathing,
decking, subflooring, and exterior decks. Also, industrial markets such
as heavy-duty pallet construction, pallet repair, and crate and box
assembly.
• Highest power-to-weight ratio in its class
• Light enough for one-handed operation for quality workmanship and
greater productivity
• Adjustable depth-of-drive allows for precise countersinking at a
lower air pressure
• High load capacity (up to 275 nails)
• Fast cycle time increases productivity
• E-Z load design saves time
• Five full year limited warranty
SCN65XP
XtremePro
™
3½" Rugged-Duty Coil Nailer
Drives .099 – .131, Smooth 2”– 3½”, Ring 2” – 3”,
Screw 1¾” – 3”. Round-Head Nails. . Capacity 250-275
F
U
L
L
R
O
U
N
D
H
E
A
D
There are eight styles of 16 different nails in plain, ring, and screw shanks.
GD, KD (.113, .131)
HD (.120)
BL, GL, HL (.099, .113, .120)
BK, HK (.099, .120)
3
3
1
/4 3
1
/2
2
1
/22
1
/4
2
3
/8
2
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire)
operates in the following a sequence - depress the safety element at the nose of tool
against the work surface then pull the trigger. After each fastener is driven, release the
trigger and lift the tool off the work surface before starting the sequence again. This
trigger is recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion, depressing
the safety element at the nose of the tool against the work surface where the fastener is
to be driven. This trigger is recommended for use by trained professionals only in
high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions. For additional information on trigger systems and
how SENCO will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 800-543-4596 to find your nearest Authorized Senco Dealer, Distributor
or visit our web site at: www.senco.com
®
©2007 Senco Products, Inc.
www.senco.com