Filter
Top Products
Model W1676
COMBINATION SANDER
MANUAL UPDATE
This update covers changes made to the machine after the owner's manual was printed. All page number
references refer to the owner's manual for this machine. Keep this update with your owner's manual for
future reference.
If you have questions, contact Tech Support at (360) 734-3482 or by email at
tech_support@shopfox.biz
.
COPYRIGHT © MARCH, 2008 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in Taiwan#10609BL
What Changed?
We added a sleeve guard to the sander to help
reduce the risk of entanglement. The sleeve
guard MUST be installed on the idler roller
guard, using the included lock knobs and flat
washers, as shown in Figure
1.
Install the idler roller guard and sleeve guard
onto the idler roller after belt tension and track
-
ing are properly set, as described in the Model
W1676 Manual on Pages 18 & 19
.
Figure 1. Installing sleeve guard.
Machine Inventory (See Page 11)
The following items have been added. Refer to
the full manual for a description of all other
inventory components.
Box Contents
: Qty
A. Sleeve Guard .................................. 1
B. Lock Knobs ..................................... 2
C. Flat Washers #10 .............................. 2
New Sleeve Guard Parts
REF PART�# DESCRIPTION
114A X1676114A IDLER�ROLLER�GUARD�V2.03.08
114A-1 X1676114A-1 SLEEVE
�GUARD
128 X1676128 LOCK
�KNOB
129 PW03 FLAT
�WASHER�#10
Figure 2. New sleeve guard parts.
Lock Knob
Sleeve Guard
Idler Roller
Guard
#10 Flat
Washer