Woodstock W1819 Saw User Manual


  Open as PDF
of 3
 
Model W1819 Machine Specifications, Page 1 of 3
MODEL W1819
SHOP FOX
®
CABINET SAW W/ RIVING KNIFE
Motors
Main
Type......................................................................... TEFC Capacitor Start Induction
Horsepower................................................................................................. 3 HP
Voltage...................................................................................................... 230V
Phase...................................................................................................... Single
Amps....................................................................................................... 12.8A
Speed.................................................................................................. 3450 RPM
Cycle....................................................................................................... 60 Hz
Number of Speeds............................................................................................. 1
Power Transfer ........................................................................... Triple V-Belt Drive
Bearings.................................................................. Shielded and Permanently Sealed
Main Specifications
Blade Information
Maximum Blade Diameter............................................................................... 10 in.
Riving Knife/Spreader Thickness.......................................................... 0.1 in. (2.5mm)
Required Blade Body Thickness............................................ 0.071-0.094 in. (1.8-2.4mm)
Required Blade Kerf Thickness............................................. 0.102-0.126 in. (2.6-3.2mm)
Maximum Width of Dado............................................................................ 13/16 in.
Blade Tilt........................................................................................ Left 0-45 deg.
Arbor Size................................................................................................ 5/8 in.
Arbor Speed.......................................................................................... 4300 RPM
Arbor Bearings....................................................... Sealed and Permanently Lubricated
Cutting Capacities
Maximum Depth of Cut At 90 Degrees............................................................ 3-1/8 in.
Maximum Depth of Cut At 45 Degrees........................................................... 2-3/16 in.
Maximum Rip To Right of Blade-Standard....................................................... 29-1/2 in.
Maximum Rip To Left of Blade.................................................................... 13-1/2 in.
Table Information
Floor To Table Height................................................................................... 34 in.
Table Size Width......................................................................................... 20 in.
Table Size Depth......................................................................................... 27 in.
Table Size Thickness................................................................................. 1-7/8 in.
Table Size With Extension Wings Width......................................................... 53-3/8 in.
Table Size With Extension Wings Depth.............................................................. 27 in.
Table Size With Extension Wings Thickness...................................................... 1-7/8 in.
Distance Front of Table To Center Of Blade.................................................... 17-1/8 in.
Distance Front of Table To Blade At Maximum Cut........................................... 12-1/2 in.
next