Filter
Top Products
Form
#
Z367A
Model
5055N5055AM6
Date
2-02/A
Mini Die Grinders
-
Right Angle Head
lmpofiant
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible place.
Operator Instructions
fncludes
-
Foreseen Use,
Work
Stations, Putting Into Se,wice,
Operatina Disrnantlin~, Assembly
and
Safety Rules.
Sioux Tools, lnc.
11
7
Levi Drive
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765
Fax
No.
828-835-9685
Personal
Safety
Equtpment
a
Always
Read
tnstruct+ons
Before
Us~ng
Power
Twis
Use
-
Safety Gfasses YES
1
@
Always
Wear
Safety
Use
-
Safety Gloves
YES
Goggles
Product Net Weight
1-10
lbs
0.50
Kg
Recommended Use
Of
Balancer
Or
Support
NO
arrange for service and repair. If it is
not practical to remove tool from
service, then shut off the air supply
to the
toot and write or have written a
warning note and attach it to the tool.
-
If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
Air
Pressure
Recommendedworking
6.2
bar
90
PSI
Maximum
6.2
bar
90
PSI
Use
-
Safety Boots
Use
-
Breathing Masks YES
Use
-
Ear Protectors YES
suspension/support device.
-
When operating the tool, always keep
the body and particularly the hands
@
Wear
Hearlng
Protect~on
A
~~~~~~ged
Ewsufe
away from the working attachment
fixed to the tool.
Safety rules when using 5055Al
5055AM6 Die Grinders
-
Use accessories rated at least 20,OOORPM.
-
Prolonged exposure to vibration may cause injury.
-Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules.
-
Do not exceed the maximum working air pressure.
-
Use persona[ protection equipment as recommended.
-
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
-Use only compressed air at the recommended
conditions.
-If the tool appears to malfunction,
remove from use immediatelv and
7
Product Type
RPM
Mini Die Grinders
-
Cvcies
I%{
MI^
Right Angle Head
5055A
-
1/4"
5055AM6
a
6
mm
Test Method:
Tested
in
accordance with Pneurop
test code PN8NTCl and
IS0
Standard 3744
Recommended Hose Bore
Size
-
Minimbm
I14
ins
8
rnm
Vibration Level
2.5
Meters
i
See2
Recommended Max.
Hose Length
30
Ft
10
M
Test Method:
Tested in accordance with IS0
standards 8662 Parts 1
&
17
Noise Level:
Sound Pressure Level 93.0 dB(A)
Sound Power Level 104.0 dB(A)
-
The tool is not electrically insulated. Never use the tool
if there is any chance of coming into contact with live
electricity.
-
Always when using the toot, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
by persons
train~d to do so.
-
Do not lock, tape, wire, etc. the 'On/OfY valve in 'On'
position. The triggerllever, etc. must always be free to
return to the 'Off' position when released.
-Always
shut off the air supply to the tool and press the
All Pipe
And
Fittings
Should
Be
11T
Or
Large
with
Suflicient
Capacity
To
Maintain
Recommended
Working
Pressure
At
Recommended Air Supply System
Figure
1
Page No
1