Filter
Top Products
2
9
Chapter 2 Basic Setup & Configuration
2.ņMS-DOSŇwindow will appear.
3.TypeņipconfigŇafter the command ofņc:>Ňand then press enter.
4.MS-DOS will appear your NIC address in the window, please take notice
of the value ofņIPAddressŇandņDefault Gateway.Ň
5.The value ofņDefault GatewayŇis the IP address of BLW-54MF.
œWindows2000/XP
1.Please make sure that you do have the authority to access as an
ņAdministratorŇor you are already one of theņSystemAdministrators.Ň
2.ClickņStartƖProgramsƖAccessoriesƖCommand PromptŇor
ņStartƖRunĀ,Ňand then type inņcmd.exeŇand press enter.
3.It will appear aņMS-DOSŇwindow.
4.TypeņipconfigŇafter the command ofņc:>Ňand then press enter.
5.MS-DOS will appear your NIC address in the window, please take notice
of the value ofņIPAddressŇandņDefault Gateway.Ň
6.The value ofņDefault GatewayŇis the IP address of BLW-54MF.
œLinux / Unix-Like
1.At first please make sure that your NIC are already enabled and works
properly.
2.And be sure you haveņrootŇnumber or your already are one of the
members of aņroot
Ňgroup.
3.Please typeņifconfigŇofņifconfig -a Ňafterņ#Ňand then press enter.
4.It will appear your present NIC address in the window, please take notice
of the value ofņIPAddressŇandņGateway.Ň
5.The value ofņGatewayŇis the IP address of BLW-54MF.
If you can getņIP AddressŇandņGateway,Ň normally, it means that
you may use web browser to configure BLW-54MF. Type your destination
ęņh tt p://192.168.1.1Ň (default IP Address of BLW-54MF) on th e
Address Bar in the web browser. If you have changed the default IP
Address of BLW-54MF, please type in the new address on the address bar.