Filter
Top Products
3
46
BLW-54MF
œMetricĈMetric determines which route the router should use to forward
a packet.
œAddĈClick this button to add a new route and the added route will be
listed on the list at the bottom of the page.
œUpdateĈUpdate the modification you have made to the Static Routing
function.
œDeleteĈDelete the route which you set before.
œCancelĈIf you do not want to configure this setting right now, click this
button to exist this page.
1.2 Dynamic
The ability for a router to forward data via a different route based on the
current conditions of the communications circuits. For example, it can
adjust for overloaded traffic or failing lines and is much more flexible than
static routing, which uses a fixed forwarding path.
œNATĈEnable NAT (Network Address Translation) function to receive/
transmit your dynamic routing path.
œTransmit/ReceiveĈYou may choose toņDisabledŇthe function or
use RIP1, RIP2, the interior gateway protocol to choose the path.
œCancelĈIf you do not want to configure this setting right now, click this
button to exist this page.
œSaveĈClick this button to save/apply the settings and restart the system.