Filter
Top Products
Operator Information
2–6
THS710A, THS720A, THS730A & THS720P Service Manual
3. After choosing some menu items, you need to set a numerical parameter to
complete the setup. Use the
+
/–
rocker to adjust the parameter or press the
TOGGLE button to reset the parameter to its default value.
4. If the OK bezel button is displayed, press it to confirm your choice.
NOTE. In the Performance Verification, Adjustments, and Maintenance chapters
of this manual, TekScope instrument setups are shown in tables. Refer to
Conventions on page x for information about reading these tables.