I need a owners manual to this charger, it has stopped working.

Asked by Sid on 05/31/2010 12  Answers

ManualsOnline posted an answer 14 years, 4 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
4 check continuity. should be open in one direction, conduct in other direction with ohm meter.no manual needed to check rectifier ( diode's on heatsink )
Was this answer helpful?
4 How do you fix the rectifier? I need a manual or schematic?
Was this answer helpful?
1 check out-put fuse
Was this answer helpful?
1 you probably have a bad rectifier ( repairable ) or a bad transformer ( not repairable )
Was this answer helpful?
0 wont charge no voltage out.
Was this answer helpful?
0 The charger will not charge up a battery. It puts out about 1.9V on 10 AMP charge and 1.6V on 2 AMP charge. It will put out 2.2V on Engine Start. Does anyone have a manual for this charger?
Was this answer helpful?
0 I checked the output fuse which is a 25 AMP fuse, and it was OK. Do you know the output voltage it is suppose to put out on all charging options?
Was this answer helpful?
0 if it`s a 12volt charger it should put out min. 12 volts
Was this answer helpful?
0 What can I do to get it fixed?
Was this answer helpful?
0 you probably have a bad rectifier ( repairable ) or a bad transformer ( not repairable )
Was this answer helpful?
0 I know this post is 2 years late but I'm also looking for a manual just to have it, I do know this model is a smart charger, it will not try to charge a battery that's very low i.e. 6-7 volts or so left in a 12 volt battery like a manual charger does so using a volt meter will not work with this one unless you connect it to a battery that it senses has some life left.
Was this answer helpful?
0 If in deed its not working here's a link that might help: http://chuck.kichline.com/fixit/charger/default.htm
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.