need manual plus compressor is not building air. Builds about 30psi

Asked by paul on 12/11/2011 2  Answers

ManualsOnline posted an answer 13 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 There are many reasons for this loss of pressure build loss, most common in my experience are head related. Disconnect the plastic shroud & discharge tube from bottom of head fitting, remove head bolts carefully. You will most likely find either a blown out gasket, broken inlet/outlet reed valves, pieces of those valves then tear up the piston ring & scuff up you cylinder wall something bad. Any of these conditions can be corrected by ordering the right combination of replacement parts, all available thru Gardner inc. or ereplacement.com. Make sure you l use loctite 545 or equivalent when reassembling all parts, including head bolts. Hope this gets read & helps someone.
Was this answer helpful?
0 I have the same problem. Did you ever get a resolution ?
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.