My Ryobi AP-10 feed rollers have stopped feeding. On checking they do not turn when the motor runs?

Asked by Don on 09/24/2014 2  Answers

ManualsOnline posted an answer 9 years, 6 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0 Hi canebayflyer, I have an AP-10 also. You may want to check the drive belt. It could be stretched just enough to loose tension or broken. Sometimes this happens with age. You can find a parts diagram along with part numbers here:(http://www.ereplacementparts.com/ryobi-ap10-planer-parts-c-7931_7939_32545.html). If you decide to take it apart, take pictures. They are invaluable in the reassembly process. I'm speaking from experience because I've taken mine apart. Good luck, sawdust88
Was this answer helpful?
0 @ canebayflyer, Just read a comment here that suggested to clean the rollers with a pitch / gum remover. Denatured alcohol was also recommended to remove wood resins from rollers. This is waaaaay easier then disassembly. It should probably be done first. Best regards, sawdust88
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.