1-1
1
11
1
Safety
1-1 INTRODUCTION
Familiarity and proper training are required for the safe operation of mechanical
equipment. Equipment operated improperly or by untrained personnel can be dangerous.
Read the operating instructions in this manual and become familiar with the location and
proper use of all controls. Inexperienced operators should receive instruction from
someone familiar with the equipment before being allowed to operate the machine. The
use of intelligence and common sense in the operation of mechanical equipment is the
best practice in any safety policy. Be professional and always observe the safety
procedures set forth in this manual.
All OSHA, ANSI, state, and local codes and regulations pertaining to this equipment
should be obtained, read, and thoroughly understood before attempting to operate this
equipment. Persons under the influence of drugs, alcohol, or prescription medication
should not be on or near this equipment. Common sense should be implemented at all
times during the use of this equipment. Do not operate this equipment in areas where the
equipment or user may come in contact with a live power source.
The information contained herein is not to be considered as legal advice and is intended
for informational purposes only. This information is offered to alert Bil-Jax customers to
procedures that may be of concern to them.
This information is not intended to be all inclusive and is to be followed in the use of Bil-
Jax equipment only.
For any questions concerning the safe use of this equipment, call 419.445.9675 before
operating.
