Instruction Manual PSB-1401
13
Group 6 Installation Procedures
WARNING: Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify and select parts bags D and G.
2. Remove the Nylon spacers from parts bag D.
3. Place the Nylon spacers over the six mounting holes on
your Large Flat Panel display (see Figure 18).
4. Place the interface brackets over the Nylon spacers (see
Figure 19 and Figure 20).
5. Select parts bag C.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the M5x25mm screws in parts bag C, attach the
interface brackets to your Large Flat Panel display (see
Figure 19 and Figure 20). Do not overtighten the mounting
screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag C M4 x 30mm Phillips Head Cap Screw 4
Parts Bag D Nylon Spacer .50” OD x .285” ID x .625” 4
Parts Bag G M5 x 25mm Phillips Head Cap Screw 6
ATTACH MOUNTING BRACKETS
USING THESE HOLES
Figure 18. Spacer Location for Group 6
Figure 19. Spacer Installation for Group 6
Figure 20. Bracket Attachment for Group 6
