Instruction Manual PSB-1401
23
Group 16 Installation Procedures
WARNING:Failure to use proper attaching hardware and
installation procedures may result in equip-
ment damage or serious personal injury.
Attach Interface Brackets
1. Identify parts bags B and F.
2. Remove the Nylon spacers from parts bag B.
3. Place the Nylon spacers over the four mounting holes on
your display (see Figure 45).
4. Place the interface brackets over the Nylon spacers (see
Figure 46).
5. Select parts bag F.
CAUTION: Overtightening mounting screws may damage
your Large Flat Panel display.
6. Using the hardware from parts bag F, attach the interface
brackets to your Large Flat Panel display (see
Figure 46). Do not overtighten the mounting screws.
Item Description Qty.
Bracket Left 1
Bracket Right 1
Parts Bag B Nylon Spacer .75” OD x .26” ID x .375” 12
Parts Bag F M5 x 20mm Phillips Head Cap Screw 4
Figure 43. Spacer Installation for Group 16
ATTACH MOUNTING
BRACKETS USING
THESE HOLES
Figure 44. Bracket Attachment for Group 16
