6
NOTE: Avoid overloading your circuit by not using other high wattage appliances
in the same outlet.
Control Knob Oscillating Switch
4. Rotate the control knob to the desired function.
OFF
LO HI
Off Fan Low heat mode High heat mode
5. Turning the Oscillating Switch to the “ON” position will allow the Tower Heater to
oscillate left and right. To stop the oscillation, turn the oscillating switch to the
“OFF” position.
6. To turn the Tower Heater OFF, rotate the control knob to the “OFF” position, then
remove the plug from the wall outlet.
SAFETY PROTECTION SYSTEMS
This Tower Heater has protection safeguards that shut off the Tower Heater hwne
components become excessively hot.
IF OVERHEATED
• If the Tower Heater becomes overheated, it will shut OFF automatically.
• Remove any nearby objects that may be causing overheat conditions. Keep at
least three feet of space on all sides of the Tower Heater to allow adequate air
circulation.
• Use the Tower Heater in a well-ventilated area.
• Place the Tower Heater on a flat, smooth, stable surface.
• Unplug the Tower Heater from power outlet. Allow Tower Heater to completely
cool then plug back into the electrical outlet.
