22
920-087-02 (9-03)
DESK CONTROL KIT A eld installed kit which allows the
unit to be turned on or off from a remote central station via
a 24V interface.
PXDC
RT2
DIGITAL REMOTE THERMOSTAT A Honeywell wall
mounted remote thermostat. Requires proper P-Series
chassis.
RT2
NEW CONSTRUCTION ACCESSORIES
Friedrich PTAC Accessories
MODEL NUMBER DESCRIPTION PHOTO
WALL SLEEVE G-90 zinc coated steel is prepared in an eleven-
step process, then electrostatically coated with a polyester nish
and cured in an oven for exceptional durability. The wall sleeve
is insulated for thermal efciency. 16" High x 42" Wide x 13"
Deep.
PXWS
DEEP WALL SLEEVE EXTENSION A four inch deep anodized
aluminium extension that attaches to the outside of the wall sleeve
when the wall is greater than eleven inches thick (9" when a
subbase is used, 10 inches when a lateral duct is used).
PXWE
PXGA
GRILLE, standard, stamped aluminium, anodized to resist
chalking and oxidation.
PXAA
PXDB
PXSC
ARCHITECTURAL GRILLS that consist of heavy-gauge
6063-T5 aluminium alloy:
Clear, extruded aluminium or dark bronze acrylic enamel
Also available in custom colors.
PXDR10
CONDENSATE DRAIN KIT Attaches to the bottom of the wall
sleeve for internal draining of condensate or to the rear wall sleeve
ange for external draining. Recommended on all units to remove
excess condensate. Packaged in quantities of ten.
PXSB
DECORATIVE SUBBASE Provides unit support for walls less
than six inches thick. Includes leveling legs, side ller panels
and mounting brackets for electrical accessories. Accepts
circuit breaker, power disconnect switch, or conduit kit.
PXCJ
CONDUIT KIT WITH JUNCTION BOX Hard wire conduit kit
with junction box for 208/230V and 256V units (subbase not
required). Kit includes a means of quick disconnect for easy
removal of the chassis. *Required for 265V installations.
PXDB
PXCJ
PXWS
PXDR10
PXWE
PXSB
PXDC
