A SERVICE OF

logo

English
2. CABLE CONNECTION
13
2-2. Connecting the signal cable
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable (enclosed)
Video Output
Connector D-Sub
mini 15 pin
Standard graphics card
Macintosh G3 (Blue & White) /
G4
Signal Cable (enclosed) +
Adapter
Video Output
Connector D-Sub
15 pin
Macintosh
Macintosh Adapter (Optional)
Digital Input
FD-C04 (Optional)
Video Output
Connector DVI-I
Digital Graphics card
FD-C04 (Optional)
NOTE
The L465 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple
Display Connector).
Power Cord
Power Cord