18
2 USING THE SCREENMANAGER
2-2 Screen Adjustment
“Screen” adjustments for the LCD monitor should be used in suppressing
screen flickering and also for adjusting the screen to its proper position.
There is only one correct position for each display mode. It is also
recommended to use the ScreenManager function when first installing
the display or whenever changing the system.
For convenience, an easy set-up Program installed on the utility disk to
assist in the set-up procedure is provided.
Adjustment Procedure
Overview
(1) Install and run the "Screen Adjustment Program"
in the utility disk.
(2) Push the Auto adjustment button.
(3) Enter the ScreenManager and select the
"Screen" menu.
Horizontal bars appear.
OK
(9) Exit the ScreenManager.
(7) Confirm the "Resolution". (The "Screen
Adjustment program" shows "Resolution", but this
LCD monitor does not provide the adjustment.
Skip this adjustment.)
(4) "Clock" adjustment
(5) "Phase" adjustment
(6) "Position" adjustment
(8) "Contrast/Brightness" adjustment
