English
7. TROUBLESHOOTING
43
Problems Points to check with possible solutions
19. The <Brightness> cannot be
selected in FineContrast CAL
mode.
After the calibration, the brightness adjustment
function is automatically locked. Please refer to
page 34 to unlock.
20. Frequency does not change after
installing “Monitor information
file” in the attached utility disk
on Windows 98/2000/Me/XP.
Use the graphics board’s utility software to change
the input signal frequency.
21. PC is hung up. / The peripherals
connected to the downstream
ports do not operate.
Check that the USB cable is correctly connected.
Check the downstream ports by connecting the
peripherals to other downstream ports. If the
problem is solved by doing this, contact an EIZO
dealer. (For details, refer to the manual of the PC.)
Try executing the following method.
- Restarting the PC
- Connecting the PC and peripherals directly
If the problem is solved by doing this, contact an
EIZO dealer.
22. USB function cannot be setup.
Check that the USB cable is correctly connected.
Check that the PC and OS are USB compliant. (For
verification of USB support, consult the
manufacturer of each system.)
Check the PC’s BIOS setting for USB. (For details,
refer to the manual of the PC.)
