6. Adjusting the sight
The rear sight can be adjusted for windage. This adjustment is made
by pulling the rear slide back and loosening the two sight screws. If
your air pistol is shooting too far to the right, slide the rear sight to the
left. If your air pistol is shooting too far to the left, slide the rear sight
to the right (Fig. 15). Fire several test shots to confirm your sight
adjustment and
then tighten the
screws that
secure the rear
sight.
Fig. 15
Rear sight
Rear sight screw
to high
to low
Fig. 14
right
7. Removing the backstrap
Remove the pin and remove the backstrap from the bottom
of the grip (Fig. 16).
Fig. 16
8. Use and handling of CO2 cartridges
It is possible that certain conditions may affect a CO
2
pistol, which
can impact its proper performance. These conditions include the
usage, maintenance, and storage at certain temperatures that are
higher or lower than normal outdoors temperatures
(from 59°F / 15°C to 69.8°F / 21°C).
Another condition may be when the gun is shot at fast speeds.
