Filter
Top Products
30 31
ADF’S WITH RESPIRATORY
PROTECTION
Eye, Face and
Respiratory
Protection for
Weld Prep/Grinding
3M
™
Speedglas
™
FlexView with Adflo
™
System
The new FlexView system combines full eye and
face protection (for both welding and low light
weld preparation) with a slim, lightweight, powered
air purifying respirator. For chipping, grinding, or
preparation, the user simply lifts up the spring-
mounted Speedglas filter assembly. The spring
holds the auto-darkening filter securely on top of
the helmet, giving the welder a big clear view
through the clear polycarbonate faceshield.
The faceshield allows for precision grinding and
cleaning, the careful alignment of electrodes and
the inspection of newly-completed welds…all with
constant eye and face protection, even in dark
conditions.
The faceshield meets the ANSI Z87.1-2003
industrial eye and face protection standard, which
does not recommend “…filter or tinted filters that
restrict light transmittance…” when chipping or
grinding (American National Standard Z87.1-2003).*
3M
™
Speedglas
™
FlexView with Adflo
™
System Specifications
Safety Standards:
Eye and Face Protection: ANSI Z87.1-2003
Helmet Weight: 20 oz./565g
Helmet Material: Polyamide nylon
Part Numbers
FlexView with Adflo HE
particle filter system: 16-1101-(filter option)
FlexView with Adflo HE filter
+ OV/SD/CL/HC cartridge
System: 16-3301-(filter option)
3M
™
Adflo
™
System Specifications
Assigned Protection Factor: 25
Airflow (nominal): 6+ cfm (170+ lpm)
minimum
Battery, NiMH:
HE: up to 12 - 13 hrs/charge
HE + OV/SD/CL/HC: up to 5.5 - 6 hrs/charge
Battery Charging Time: 3 hours
Weight,Adflo turbo w/ battery,
Breathing tube and belt: 4.48 lbs (2.03 kg)
OV/SD/CL/HC Cartridge: 1.5 lbs (0.70 kg)
Operating Temperatures: 23° to 131°F (-5° to 55°C)
Respirator Approval: NIOSH 42 CFR 84*
3M
™
Speedglas
™
Filter Options
Fixed Shade
10, 11 or 12: Speedglas filter 9000F
shade 10, 11 or 12
10X, 11X or 12X: Speedglas filter 9000XF
shade 10, 11 or 12
Variable Shade
31: Speedglas filter 9002V
21: Speedglas filter 9002X
*Approved for: HE
HE + OV/SD/CL/HC
Replacement Parts: see page 42.
*Important Note: Impact resistant, primary eye
protection, spectacles or goggles that meet current ANSI
specifications, must be worn at all times when using any
welding helmet.
16961-Rev-7A 1/14/05 5:10 PM Page 30