3M 20230 Cordless Sander User Manual


  Open as PDF
of 9
 
2
•Neverover-ridethesafetystart-stopcontrolsuchthatitisintheonposition.
•Useonlywithmountinghardwarerecommendedby3M;checkwith3Mformountinghardwarerequirements.
•Alwaysensurethatshaftdiametersmatchinternaldiametersofthecolletinserts.
•Maximumoperatingspeedofabrasiveproductsoraccessoriesmustbereducedwhenevertheexposedlengthofshaft(overhang)islongerthan
corresponding 3M approved products.
•Alwaysensurethataminimumof10mmshaftgrippinglengthisobserved.
•Neverinstallanduserouterbitsorcutting-offwheelsinadiegrindertool(whichisunguarded).
•Useonlywithabrasiveproductsnotrequiringguardsaccordingtolocal,stateandfederalregulations.
To reduce the risks associated with vibration:
•Ifanyphysicalhand/wristdiscomfortisexperienced,workshouldbestoppedpromptlytoseekmedicalattention.Hand,wristandarminjurymayresult
from repetitive work, motion and overexposure to vibration.
To reduce the risks associated with loud noise:
•Alwayswearprotectionforeyes,ears,andrespiratoryprotectionwhileoperatingthisproduct.Followyouremployer’ssafetypolicyforPPE’sand/orANSI
Z87.1orlocal/nationalstandardsforeyewearandotherpersonalprotectiveequipmentrequirements.
To reduce the risks associated with fire or explosion:
•Donotoperatethetoolinexplosiveatmospheres,suchasinthepresenceofammableliquids,gases,ordust.Theabrasivesareabletocreatesparks
whenworkingmaterial,resultingintheignitionoftheammabledustorfumes.
To reduce the risks associated with hazardous dust ingestion or eye/skin exposure:
•Useappropriaterespiratoryandskinprotection,orlocalexhaustasstatedintheMSDSofthematerialbeingworkedon.
To reduce the risks associated with hazardous voltage:
•Donotallowthistooltocomeintocontactwithelectricalpowersourcesasthetoolisnotinsulatedagainstelectricalshock.
CAUTION!
To reduce the risks associated with skin abrasion, burns, cuts, or entrapment:
•Keephands,hair,andclothingawayfromtherotatingpartofthetool.
•Wearsuitableprotectivegloveswhileoperatingtool.
•Donottouchtherotatingpartsduringoperationforanyreason.
•Donotforcetooloruseexcessiveforcewhenusingtool.
To reduce the risks associated with whipping:
•Ensuresupplyhoseisoilresistantandisproperlyratedforrequiredworkingpressure.
•Donotusetoolswithlooseordamagedairhosesorttings.
To reduce the risks associated with fly off of abrasive product parts:
•Usecareinattachingabrasiveproduct,discpad,andmountinghardware;followingtheinstructionstoensurethattheyaresecurelyattachedto
the tool before use.
To reduce the risks associated with hazardous pressure-rupture:
•Beawarethatincorrectlyinstalledhosesandttingsmightunexpectedlycomelooseatanytimeandcreateawhipping/impacthazard.
WARNING
 previous next