Filter
Top Products
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive Preheater User’s Manual
4
©3M 2007 January
Instructions for Use (continued)
5. Select adhesive cartridge and place on a
bench or flat work surface with the threaded
nozzle pointing upward.
6. Place a punch or similar tool into the nozzle
portion of the cartridge as shown. Tap the
punch handle with a hammer, mallet or
similar object until the aluminum seal has
been pierced.
!
WARNING
3M™ Scotch-Weld™
Polyurethane Reactive (PUR)
Easy 250 Adhesive Cartridges
should be preheated or used in
3M
™
Scotc
h-Weld™
Polyurethane Reactive (PUR)
Easy 250 Adhesive Preheater or
3M™ Scotch-Weld™
Polyurethane Reactive (PUR)
Easy 250 Adhesive Applicator
only. Do not preheat 3M
Scotch-Weld Polyurethane
Reactive (PUR) Easy 250
Adhesive Cartridges in ovens or
other heating devices or use in
other applicators.
May cause
hazardous conditions.
IMPORTANT:
Assuring
disposable nozzle is tight and
flush with cartridge will reduce
adhesive build-up in the
applicator.
!
Caution
Avoid contact with top surface
and metal heating chambers of
preheater during use and hot
adhesive cartridges and
adhesive.
May cause burns.
IMPORTANT:
Wear heat
resistant gloves and safety
glasses when using.
!
WARNING
Use only 3M™ Scotch-Weld™
Polyurethane Reactive (PUR)
Easy 250 Adhesive. Use with
any other material
may cause
hazardous conditions.
7. Select and attach a disposable nozzle (A) provided with the 3M™
Scotch-Weld™ Polyurethane Reactive (PUR) Easy 250 Adhesive onto
the cartridge by turning clockwise until the nozzle base is tight or flush
with the cartridge using supplied plastic wrench (B) to aid tightening.
A
B