3M 3125 Sander User Manual


 
3
Nib Removal Sander 3125
Owner’s manual
A table of contents:
a. SAFETY INFORMATION 1
b. OPERATING INSTRUCTION 3
c. SPARE PARTS INFORMATION (exploded view) 4
d. DISASSEMBLY METHOD 6
e. GUIDELINE FOR PARTS EXCHANGE 10
f. ASSEMBLY METHOD 11
Appendix. - TROUBLESHOOTING SPIDER CHART
a. SAFETY INFORMATION
Please read, understand, and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
Intended Use:
This tool is designed for repairing painted automobile bodies and parts as well as FRP (Fiber Reinforced Plastic) and wood. It
should not be operated in water or in an excessive wet application. All users should review this document and be trained in the
safe use of this tool.
Improper use can cause this tool to break apart and may cause injury to operators and bystanders. **
* For eye and face protection, see ANSI standard Z87.1
** For further information on coated abrasive products, consult ANSI standard B7.7, “Safety Requirement for Abrading
Material with Coated Abrasive Systems” Both are available from American Standard Institute, Inc., (212)642-4900
SPECIFICATION
Motor RPM Orbit Dia. Air flow Air Pressure Weight Pad Size
7,500 0.118 inch 5.3 SFM 58. 5 - 95.0 PSI 1.06 pounds 1.18 inch
(3 mm) (150 LPM) (0.40 - 0.65 Mpa) (0.48 kg) (30 mm)
1