3M 7141 Saw User Manual


  Open as PDF
of 2
 
2
The 3M
TM
6878/07141 Spectacle Kit consists of a frame assembly and a rail assembly. The frame
assembly is the holder for the corrective lenses. The rail assembly supports the frame assembly
in the facepiece and allows for up and down, in and out positioning of the frame assembly.
1. Install rail assembly into facepiece as shown with plastic foot positioned on the center port adapter. (The
slot in foot is positioned over ridge on adapter as shown.)
2. Install frame assembly onto rail assembly by inserting pins into holes in rubber slide as shown. The top
of rail is centered between nubs at top of faceseal. (The rubber slide can be removed from the rail
assembly and reversed for additional in and out movement of the frame assembly.)
3. Spectacles can now be moved up, down, in or out to obtain optimal fit and vision.
a) Frame Assembly
b) Rail Assembly
c) Rail Foot
d) Rubber Slide
FOR MORE INFORMATION
In United States, contact:
Internet: www.3M.com/occsafety
Technical Assistance: 1-800-243-4630
For other 3M products:
1-800-3M-HELPS or 1-651-737-6501
3M Occupational Health and
Environmental Safety Division
3M Center, Building 0235-02-W-70
St. Paul, MN 55144-1000
©3M 2003 38-9018-9565-6
 previous