3M Series 57ZZ Paint Sprayer User Manual


  Open as PDF
of 42
 
5
Spray Gun Overview
3M spray guns were designed from the inside out for the effective, efficient, economical application of paints, adhesives,
coatings and finishes. These spray guns deliver large spray patterns with very low overspray. The soft, tight, adjustable
pattern with complete atomization results in a high finish quality and absolute control. Each light weight spray gun is
designed for easy handling, reliability and durability and for minimum maintenance costs.
3M’sAutomaticHVLPspraygunsdeliversuperioratomizationforawiderangeofcoatings.Thestandardspraygun
body is made of light weight aluminum. The Zinc HVLP Automatic Spray Gun body is made of composite material.
Manufactured for durability and dependability, both versions are easy to maintain for long-lasting performance.
3M equipment is for professional use only. Hazards can occur from equipment misuse. Any misuse of the equipment
oraccessories,suchasoverpressurizing,modifyingparts,usingincompatiblechemicalsanduids,orusingwornor
damagedpartscancauseseriousbodilyinjury,re,explosionorpropertydamage.Please read and follow all Safety
Statements and Instructions.
Contents
Unpacking
Removethecomponentsfromthebox.Inspectforconcealeddamageand/ormissingitems.Ifyoudiscoveranydamage
and/or missing pieces, contact your distributor immediately.
Series 52 Series 55
Series 56 Series 57
*Maximuminletpressurewillyieldapproximately10psiattheaircap.
3M™ Series 52 HVLP Automatic Spray Gun
All Series 52 HVLP Automatic Spray Guns are non-bleed
spray guns with low pressure air inlets and a manual rear fan
control. These spray guns are available with an aluminum
gun body, 10 cfm air consumption, 1:1 reduction ratio, ¾” air
inletconnection,anda10psimaximuminletairpressure*.
These spray guns are most commonly used for stationary or
reciprocator mounting applications.
 previous next