Filter
Top Products
connect t1 1/1 tdm-group 11
connect t1 1/1 tdm-group 12
connect t1 1/1 tdm-group 13
connect t1 1/1 tdm-group 14
connect t1 1/1 tdm-group 15
connect t1 1/1 tdm-group 16
connect t1 1/1 tdm-group 17
connect t1 1/1 tdm-group 18
connect t1 1/1 tdm-group 19
connect t1 1/1 tdm-group 20
connect t1 1/1 tdm-group 21
connect t1 1/1 tdm-group 22
connect t1 1/1 tdm-group 23
connect t1 1/1 tdm-group 24
rtp delay-mode adaptive
In each case, please verify that the voice grouped trunks contain the proper
references for the new interface identifiers.
Samples for NI2 user, NI2 network, and T1 CAS will be provided in the firmware files
zip archive. Other ISDN protocols are available, just not as a sample. Check the
AdTran documentation for details.
It is also possible when not using managed phones to manually assign a user to each
phone on the device for standalone failover options. This will allow the failover to
happen more efficiently, but will require an entry both on the IC server, and the
AdTran device for every phone being used.
6 Putback Transfer
Putback transfer is not supported by AdTran for this device at this time.
7 Security
TLS/SRTP is not supported by AdTran for this device at this time.