Filter
Top Products
CUSTOMER INSTRUCTIONS
1. The mounting of the registered unit in the final assembly must
be made so that the registered unit is isolated from exposure to
any hazardous voltages within the assembly. Adequate separa-
tion and restraint of cables and cords must be provided.
2. The circuitry from the registered unit to the telephone line must be
provided in wiring that carries no other circuitry unless specifical-
ly allowed by the rules (such as PC and PR leads). PC board traces
carrying tip and ring leads shall have sufficient spacing to avoid
surge breakdown.
3. A modular plug or jack shall be provided which complies with
Part 68, Subpart F requirements for dimensions, tolerances metal-
lic plating.