13
Chapter 2
Installing the Bridging Converter
This chapter explains how to install an AT-FS238a/x and AT-FS238b/x Series
Bridging Converters. These bridging converters can be installed on a desktop
or in an AT-MCR12 chassis.
Verifying Package Contents
Make sure the following items are included in your package. If any item is
missing or damaged, contact your Allied Telesyn sales representative for
assistance.
❑ One AT-FS238a/x or AT-FS238b/x Series Bridging Converter
❑ Four protective feet (for desktop use only)
❑ Optional power supply (depending on the model)
❑ Optional power connector
❑ This installation guide
❑ Warranty card
Note
For information on the power supplies used with the AT-FS238a/x or
AT-FS238b/x Series Bridging Converter, refer to “External Power
Supply” on page 3.