Filter
Top Products
Precautions for using the Alpha Electric Polisher.
In addition to the general safety notices described on the preceding pages, please read
and observe the following safety notices before using the machine.
WARNING
• Use protective cover.
Be sure to attach the protective cover and use it during operation.
The protective cover will protect the operator if the wheel breaks.
• Do not leave the machine unattended while running.
Do not leave the machine unattended on the workbench or workshop while it is running.
• If you accidentally drop the machine, do not use the machine until checking that it is not
cracked, deformed, or damaged.
Cracks, deformation, or damage of the machine and/or wheel may cause bodily injury.
CAUTION
• Follow the procedures specified in the instruction manual correctly to attach a wheel or
an accessory to the machine.
If accessories are not correctly attached, they will scatter or fall off and may cause bodily injury.
• When for the 1st time a new wheel is attached and machine is turned on, observe any
suspicious abnormal noises.
• Conduct a test run.
Wait until the machine reaches operating rotation speed, and check that there are no abnormal
sounds or vibrations during idling. Refer to page 12 (7. Making test run)
Operations without conducting a test run could cause bodily injury.
• Be careful of your surroundings when working in high places.
When working in high places, make sure there are no people below.
Be careful not to catch the power cord on anything.
Be careful not to drop the machine or any materials. They may cause an accident.
• Install the power cord and the water hose to avoid interference with working area.
Make sure the power cord and the water hose do not interfere with working area.
6