Filter
Top Products
5
ALWAYS SECURE WORK PIECE. Use clamps or a vise to hold work. It’s
safer than using your hand and it frees both hands to operate tool.
DON’T OVERREACH. Keep proper footing and balance at all times.
DISCONNECT TOOLS WHEN NOT IN USE. Always disconnect tool before
servicing; when changing accessories such as grinding wheels, backer
pads, etc.
REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking
to see that keys and adjusting wrenches are removed from tool before
turning it on.
MAINTAIN TOOLS WITH CARE. Keep tools clean at all times for best
and safest performance. Follow instructions for lubricating and changing
accessories. Keep handles dry, clean and free of oil or grease. Inspect
moving parts for alignment and binding as well as for breakage and improper
mounting.
AVOID ACCIDENTAL STARTING. Don’t carry a “connected” tool, or make
adjustments, or change discs without making sure the air valve is in the off
position to prevent the fl ow of air.
USE ONLY RECOMMENDED ACCESSORIES. The use of any accessories
other than what is listed or recommended for this particular tool may be
hazardous.
KEEP HANDS AWAY FROM ALL MOVING PARTS.
USE SIDE HANDLES. Supplied with tool for control and safety.
USE RECOMMENDED GRINDING WHEELS ONLY. Do not use
conventional abrasive grinding wheels with this tool. Only use diamond
grinding wheels which are rated for wet usage.
STAY ALERT. Watch what you are doing and use common sense. Do
not operate tool when you are tired, or under the infl uence of medication
or alcohol.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.