Filter
Top Products
AMERICAN SANDERS TECHNOLOGY EZ - 8 Sander Operator's Manual Page 3
DANGER means: Severe bodily injury or death can occur to you or other personnel if the
DANGER statements found on this machine or in this Owner's Manual are
ignored or are not adhered to. Read and observe all DANGER statements
found in this Owner's Manual and on your machine.
WARNING means: Injury can occur to you or to other personnel if the WARNING statements
found on your machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all WARNING statements found in this Owner's
Manual and on your machine.
CAUTION means: Damage can occur to the machine or to other property if the CAUTION state-
ments found on your machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all CAUTION statements found in this Owner's
Manual and on your machine.
DANGER: Failure to read the Owner's Manual prior to operating or attempting any service or mainte-
nance procedure to your American Sanders Technology machine could result in injury to
you or to other personnel; damage to the machine or to other property could occur as
well. You must have training in the operation of this machine before using it. If you or
your operator(s) cannot read English, have this manual explained fully before
attempting to operate this machine.
DANGER: Sanding/finishing wood floors can create an environment that can be a fire hazard or
explosive. Do not operate this machine around solvents, thinners, alcohol, fuel, floor
finishes, wood dust or any other flammable materials. Vapors and wood dust generated by
sanding or finishing wood flooring can create an explosive environment. Cigarette lighters,
pilot lights, electrical sparks and all other sources of ignition should be extinguished or
avoided. Keep work area well ventilated.
DANGER: Hitting a nail while sanding can cause sparks and create an explosion or fire. Always use
a hammer and punch to countersink all nails before sanding floors.
DANGER: Spontaneous combustion or an explosion can occur when working with sanding dust. The
sanding dust can ignite and cause injury or damage. Never over fill dust bag or leave
machine unattended with dust in bag. Empty the sanding dust in a metal container clear of
any combustible materials. Do not empty into fire.
DANGER: Operating a machine that is not completely or fully assembled could result in injury or
property damage. Do not operate this machine until it is completely assembled. Keep
all fasteners tight. Keep adjustments according to machine specifications.
DANGER: Moving parts of this machine can cause severe injury. Keep hands, feet and loose clothing
away from all moving parts of the sander. Disconnect machine from power source before
accessing the sanding drum, drive belts, or fan chamber. Do not operate unless drum cover,
belt guard, and dust pipe are in place. Never leave machine unattended while motor is running
or connected to power source.
WARNING AVERTISSEMENT ADVERTENCIA
OPERATOR SAFETY INSTRUCTIONS
IVIE Enterprises
www.ivie-ent.com Ph:(918)254-5161 or (888)262-5161 Fax:(918)250-4807