Filter
Top Products
8
11. PROCESS control
This control renews any high frequencies lost through the compression process for natural sounding dynamics control, which
can be varied from off to 6. Please note that the enhancer control is only used when compression is taking place.
3.4 The Back Panel
Pic.5: The Back Panel Layout Of The BK 2.0
13
12
15 14 16
OUTPUT
INPUT
TIP = INPUT
RING = OUTPUT
SLEEVE=GROUND
OUTPUT
INPUT
TIP = INPUT
RING = OUTPUT
SLEEVE=GROUND
CHANNEL 1
SIDECHAIN
CHANNEL 2
SIDECHAIN
AC INPUT
95-120V/ 210-240V6 0-50Hz
Rated Power Consumption 8W
FUSE:
210-240V: T100mAL 250VAC
95-120V: 200mA 250VAC
REPLACE FUSE WITH
CORRECT TYPE ONLY
SERIAL
MODEL
2
1
3
2
1
3
The fuse-holder above the AC connector on the rear of the chassis has 3 triangular markers(please refer to the above
pictures), with two of these triangles opposing each other, your unit is set to the operating voltage printed next to these
markers.
To change, pull fuse-holder out and rotat