Filter
Top Products
©American DJ Supply
American DJ World Headquarters:
4295 Charter Street Los Angeles, CA 90058 USA
Tel: 323-582-2650 / Fax: 323-582-2610
Web: www.americandj.com / E-mail: info@americandj.com
Operating Instructions:
This unit is ready to be hung or set on a flat level surface. Please use
the included hanging bracket to suspend the unit in anyway. After the
unit has been hung or set in a desired location, plug the unit into main
power. After plugging the unit in, the lights will react to the music via
the internal sound active microphone. Adjust the sound activation knob
on the back of the unit for desired music sensitivity.
A super moonflower effect, the Nitro
™
is sound active with 7 multi-
colored/gobo combinations. The unit’s internal gobo/color wheel will
rotate back and forth to the music. Gobo/color change and wheel
rotation will vary depending on the music sensitivity setting. This unit
is fan cooled to prolong lamp and motor life.
Lens Focusing:
1. Loosen the thumb screw on the bottom of the unit that holds the
lens assembly in place.
2. Adjust the focus by manually sliding the lens back and forth.
3. Tighten the thumb screw after you achieve your desired focus.
Lamp Replacement:
Caution!
Never open the unit while it is in use. Always disconnect the
main power and allow the unit ample time to cool before attempting to
replace the lamp.
1. Be sure to follow the proper procedures when handling halogen
bulbs.
2. Lamp replacement has been made simple by incorporating the use
of a removable lamp cover and thumb screws.
3. Loosen the thumb screws on the lamp cover.
4. Remove the cover.
5. Remove and replace the lamp.
6. Reassemble.
Always be sure to replace with the exact same type lamp and fuse
unless otherwise specied by authorized American DJ® service
representative.
Cleaning:
Due to fog residue, smoke, and dust, cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
Clean the external optics with glass cleaner and a soft cloth every 30
days. Situation may vary. If used heavily in clubs with lots of fog, clean-
ing may be required more often.
Model: NITRO
™
SPECIFICATIONS:
Lamp: ZB-ELC-3 24V 250W
Power: 120V/60Hz
Fuse: 5A
Optics: High Quality Glass Lenses
Ventilation: Fan Cooled
Working Position: Hanging or set on flat surface
Weight: 19 Lbs.
Size: 11.5” x 12.5” x 5.5”
Duty Cycle: 10 min. on 10 min. off
©American DJ Supply® - www.americandj.com - Nitro
™
User Instructions Page 3 ©American DJ Supply® - www.americandj.com - Nitro
™
User Instructions Page 4