AMX IRX-SM+ Stud Sensor User Manual


  Open as PDF
of 2
 
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
042-004-2750 11/04 ©2004
AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-0455-01
REV: B
Mounting the IRX-SM+
Installation method A: Use when installing a swivel-mount unit without using the
provided mounting bracket. The cable exit is on the back mounting panel (FIG. 5).
Installation method B: Use when installing a swivel-mount unit using the provided
mounting bracket (
FIG. 6).
• On drywall, install using the included wall anchors. Use a 3/16-inch drill bit.
• On wood, install using the included #6 mounting screws.
FIG. 5 Installation Method A
FIG. 6 Installation Method B
 previous