Filter
Top Products
> Battery Grip C-40 D pro
> AC power supply adaptor with european plug
> Car adaptor
The Battery Grip C-40 D pro is a high capacity Li-Ion battery pack which is an alternative
energy supply for the Canon EOS 40D/30D/20D. Its main function is an extended
energy supply, but it also simplifies the application of light control and shooting pictures
sideways. Because the integrated battery pack has a capacity of 3600mAh, it is possible
to take up to 1000 pictures.
> Please read the manual carefully.
> Use the grip only with Canon EOS 40D/30D/20D cameras.
> Do not use in rain, very damp or humid conditions.
> Do not attempt to open or damage the housing.
> Do not short-circuit the battery.
> Disconnect from the mains supply after charging.
Charge the Battery Grip C-40 D pro with the power supply included. Charging time is
around 5 hours & will stop automatically. After the charging process is finished, the LED
on the grip turns from red into green. Disconnect the power supply from the grip.
Open the cover of the battery panel on the camera. Remove the enclosed battery. Raise
the cover of the battery panel in a 35° angel and carefully pull it out. You can place the
panel cover into the contact shaft of the grip to store it
Carefully insert the contact shaft vertically in the camera panel of the battery. Fix the
camera with the stand screw.
Now is the grip ready to use. All relevant information about capacity you will find on the
camera display. The common dial & shutter button are fully integrated in the camera
system.
The life cycle of the internal battery of the grip is about 300 times. So if you charge the
grip every week, you can use it for around 6 years.
The performance of the grip drops down at very cold temperatures.