Filter
Top Products
3
Charging
As with all Anton/Bauer chargers, charging with TITAN 70 is fully automatic. Mount any
Logic Series battery to the TITAN 70 and it will automatically determine and execute the
appropriate charge routine.
Applications
The Titan 70 will charge any Anton/Bauer Logic Series Gold Mount
®
battery including
model: ProPac
®
13/14, Trimpac
®
13/14, Digital ProPac 13/14, Digital Trimpac 13/14,
HyTRON, or ProFormer
®
battery.
NOTE: Anton/Bauer always recommends that each battery has its own charge
position. A battery can remain on an Anton/Bauer charger indefinitely.
The TITAN 70 incorporates the exclusive InterActive
®
communication between
battery and charger, which allows the charger to identify any Anton/Bauer battery
attached and determine the precise charge routine for that battery under the prevailing
conditions.
NOTE: Due to the specialized communications between the charger and the
battery, batteries without the Logic Series construction and
communication capability (manufactured by Anton/Bauer before 1989
as well as so-called “rebuilds”) can not be charged with this charger.
The InterActive communication of Logic Series batteries is the key which
allows the TITAN 70 to safely identify and address new style and
chemistry batteries as they are developed. Moreover, this
communication ensures that batteries contain the quality cells,
workmanship and safety of genuine Anton/Bauer products. If a non-
Logic Series battery is placed on the charger, the red and green LED
indicators will flash alternately. This indication means that the battery
cannot communicate its identity to the TITAN 70 and is not charging.
After 30 seconds of flashing green and red LED’s, the red LED will
remain on, indicating a HOLD state.
WARNING: USE OF THIS CHARGER WITH ANY BATTERY NOT
MANUFACTURED BY ANTON/BAUER MAY RESULT IN
BATTERY DAMAGE AND CAUSE RISK OF FIRE OR
PERSONAL INJURY.
APPROVED COPY