Anton/Bauer QUAD 2702 Battery Charger User Manual


 
12
POWER LOSS MEMORY MODE
The PowerCharger features a special Power Loss Memory or “Power Down” mode.
When mains power is interrupted while batteries are mounted, the PowerCharger will
automatically indicate the charge status of all batteries until power is restored (up to 16
hours). When power is interrupted, an audible alert will be heard every 30 seconds for
30 minutes to notify the operator if power has been inadvertently removed. The LCD
will display the message “POWER DOWN MODE” along with a counter which will
indicate time since mains power has been lost.
During “POWER DOWN MODE”, batteries more than 50% charged will be
indicating by a flashing RED LED. Batteries fully charged will be indicated by a
flashing GREEN LED. A battery less than 50% charged will show no indication.
When AC power is restored, the PowerCharger will automatically replenish the
power taken from the batteries during Power Down and resume charging each battery
in the mode and order when mains power was interrupt.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
This equipment has been approved by one or more agencies. All changes and/or
modifications not expressly approved by Anton Bauer, Inc. could void the users’
warranty and authority to operate this equipment. There are no serviceable parts in
this equipment.
POWER DOWN
00:00:00