Filter
Top Products
A/V J Type Power Conditioner and Battery Backup2
Product Overview
Front panel
Rear panel
1 SETUP button - Push to scroll through the Setup menu screens. Press and hold for three seconds to save the current
screen as the default screen.
2
STATUS button - Push to scroll through the menu screens. Press and hold for 10 seconds to view the Diagnostic
menu screens.
3 LCD Display
4
ON/OFF button - Push this button to apply power to the outlets. The unit will continue to provide surge protection
when the unit is turned on or off.
5
UP/DOWN buttons - Use the up and down buttons to scroll through options on the menu screens.
6 Removable front bezel - The front bezel can be removed to connect the battery, or to replace the battery.
1 Coaxial surge protected, input and output connectors
2 Battery Backup outlets with noise filtering; voltage regulation is available on the J35B model
3 Surge Protection outlets with noise filtering
4 Circuit breaker reset button
5 120 Vac input outlet, use with the supplied input power cord
6
Building wiring fault LED See “Troubleshooting” on page 9.
7 TVSS ground screw. Use a wire to connect any ungrounded component to this screw. Connecting to the TVSS screw
will prevent sound or video interference from ungrounded equipment.
8 Telephone line surge protection, input and output connectors
9 USB port for use with optional PowerChute
®
Personal Edition software, available as a free download at
www.apc.com. In the event of a power outage, this software will save files and gracefully shut down the computer.
Use the supplied USB cable to connect the UPS to the home computer.
: Surge Protection, Controlled by Master outlet, J35B models only.
; Controlled by Master outlets with Battery Backup, J35B models only.
< Master outlet, J35B models only.
av022a
Circuit Breaker
Push to Reset
Tel/DVR/SAT/DSLUSB
Cable
In
Cable
Out
Data Port
In To
Equipment
Input 120 V-
TVSS
GND
Building
Wiring Fault
Battery Backup
CONTROLLED BY MASTERMASTER
CONTROLLED
BY MASTER
Surge Only