Filter
Top Products
Updated hardware support
The following hardware enhancements have been made to all models of the
Network Server:
m Support has been added for the Seagate 9 gigabyte (GB) hard drive and for
8x CD-ROM drives.
m Support has been added for Ultra-SCSI drives.
m Support has been added for external connection of differential devices to
Symbios Logic PCI cards.
m Ethernet performance and reliability have been improved.
m Full PCI device driver binary compatibility has been achieved.
m Common I/O subsystem support for FDDI, ATM, and Token Ring has
been added.
Additional safety information
Observe the following safety measures to help safeguard your data and the
Network Server itself:
m Tur n th e power off before adding drives.
Unless you have installed and are using the Network Server PCI RAID
Disk Array card, always shut down the server and turn power off before
replacing or adding drives. For more information about adding drives with
RAID, check the Network Server PCI RAID Disk Array Card Administrator’s
Guide.
m Replace only one drive at a time.
Do not insert more than one drive tray into the front drive bays at the
same time.
m Ensure proper ventilation.
To en sure maximum airflow and cooling, don’t leave any drive trays out or
panels open while the server is running.
m Never use alcohol-style cleaning cartridges for tape drives.
Always use Apple-approved cleaning cassettes or cartridges.
7