Filter
Top Products
3
Getting started
Battery charging
For optimal performance, charge the handset battery for at least
16 hours before use. When fully charged, the handset battery
provides approximately five hours of talk time and three days of
standby time.
3. Place the handset
in the charger.
The CHARGE
light will be on
when charging.
1. Plug the small
end of the power
adapter into
the jack on the
underside of the
charger, then
route the cord
through the shot
as shown.
2. Plug the large
end of the power
adapter into an
electrical outlet.
Electrical outlet
not controlled
by a wall switch
Power adapter
Charger
IMPORTANT INFORMATION
• Use only the power adapter supplied with this product. To
order a replacement power adapter, visit our website at
www.telephones.att.com, or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
• The power adapter is intended to be correctly oriented in a
vertical or floor mount position. The prongs are not designed to
hold the plug in place if it is plugged into a ceiling, under-the-
table or cabinet outlet.