Filter
Top Products
Tool Cabinets and Workbenches
for the Hangar and Industry
The BAHCO workbench system will help you to stay one step ahead. These
quality roll cabinets/workbenches by BAHCO have been fitted with practical
perforated sides/doors.
Features: Construction of tool steel without distortion. With reinforced rear
axles, drawer stops and reinforced back, these are stable and resistant cabinets
for maximum performance. The large wheels give easy manouverability.
Two pivoting wheels one with brake, ensure the cabinet always comes to a safe
and total stop. All cabinets are equipped with a central locking device.
Innovative: Frequently used tools may be hung up on the perforated sides and
doors, within easy reach. What could be more simple? Trays may be hooked to
the perforated sides and can be used for storing spray cans, oil cans, etc.
Workshop roll cabinet 1422SL7-SP
Finish: Powder coated black/grey cabinet with orange gloss drawers
■ 7 sliding drawers, mounted on ball bearing runners.
Drawer-out safety stop.
■ Perforated side panels. Central lock for safety locking of cabinet.
■ Top with rubber cover, for use as working area.
■ Reinforced and enlarged rear axle with larger rubber wheels. Rubber
protection for profiled rods. Wheels with pivot foot brake (total stop).
Loading capacity: 300 kg / 660 lb.
Dimensions: H 955 x W 665 x D 385 mm
Workshop roll cabinet 1422SL5-SP
Finish: Powder coated black/grey cabinet with orange gloss top shutter
■ 4 bi-directional and 1 single direction opening drawers on ball bearing runners.
Drawer pulling stops at centre and sides.
■ Perforated side panels. Central lock for safety locking of cabinet.
■ Top with rubber cover, for use as working area.
■ Steel roll-top shutter with supplementary lock.
■ Tool stock box with reinforced bottom.
■ Reinforced and enlarged rear axle with larger rubber wheels. Rubber protection
for profiled rods. Wheels with pivot foot brake (total stop).
Loading capacity:
300 kg / 660 lb.
Dimensions:
H 955 x W 665 x D 385 mm