Filter
Top Products
BAHCO MULTI-PURPOSE
27 x 0.9 1x.035 3/4 Combo PR 3862-27-0.9-3/4
4/6 Combo PR 3862-27-0.9-4/6
34 x 1.1 1-1/4 x.042 2/3 Combo PR 3862-34-1.1-2/3
3/4 Combo PR 3862-34-1.1-3/4
4/6 Combo PR 3862-34-1.1-4/6
41 x 1.3 1-1/2 x.050 2/3 Combo PR 3862-41-1.3-2/3
3/4 Combo PR 3862-41-1.3-3/4
4/6 Combo PR 3862-41-1.3-4/6
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
3862 SANDFLEX
®
COMPENSATOR
™
The “Compensator” is designed specifically to enhance the
performance of lighter duty machines with limited feed force.
Not only do the specially designed M42 teeth give a superb
surface finish, but the Compensator is also well known for it’s
long blade life, even in difficult-to-cut steels. The positive rake
angle ensures top performance especially for the cutting of
plate material.
6 x 0.6 1/4 x.025 10 Regular 3851-6-0.6-R-10
14 Regular 3851-6-0.6-R-14
10/14 Combo 3851-6-0.6-10/14
6 x 0.9 1/4 x.035 10 Regular 3851-6-0.9-R-10
14 Regular 3851-6-0.9-R-14
10/14 Combo 3851-6-0.9-10/14
10 x 0.6 3/8 x.025 10 Regular 3851-10-0.6-R10
14 Regular 3851-10-0.6-R14
10/14 Combo 3851-10-0.6-10/14
10 x 0.9 3/8 x.035 8 Regular 3851-10-0.9-R-8
10 Regular 3851-10-0.9-R-10
14 Regular 3851-10-0.9-R-14
10/14 Combo 3851-10-0.9-10/14
13 x 0.6 1/2 x.025 10 Regular 3851-13-0.6-R-10
14 Regular 3851-13-0.6-R-14
18 Regular 3851-13-0.6-R-18
5/8 Combo PR 3851-13-0.6-5/8
6/10 Combo 3851-13-0.6-6/10
8/12 Combo 3851-13-0.6-8/12
10/14 Combo 3851-13-0.6-10/14
13 x 0.9 1/2 x.035 6 Regular 3851-13-0.9-R-6
10 Regular 3851-13-0.9-R-10
14 Regular 3851-13-0.9-R-14
6/10 Combo 3851-13-0.9-6/10
10/14 Combo 3851-13-0.9-10/14
20x0.9 3/4 x.035 4/6 Combo PS 3851-20-0.9-4/6
5/8 Combo PR 3851-20-0.9-5/8
6/10 Combo 3851-20-0.9-6/10
27 x 0.9 1 x.035 4 Regular 3851-27-0.9-R-4
6 Regular 3851-27-0.9-R-6
8 Regular 3851-27-0.9-R-8
10 Regular 3851-27-0.9-R-10
4/6 Combo PS 3851-27-0.9-4/6
5/8 Combo PR 3851-27-0.9-5/8
6/10 Combo 3851-27-0.9-6/10
8/12 Combo 3851-27-0.9-8/12
10/14 Combo 3851-27-0.9-10/14
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
3851 SANDFLEX
®
COBRA
™
A truly versatile blade with a proven track record not only in
production cutting applications but also in a variety of multi-
purpose applications, the 3851 range excels in cutting pipes,
profiles, castings, small solids and bundles on horizontal machines.
Whilst performing best on machines of medium to heavy duty,
the range is also often used on vertical machines for contour
cutting. Using M42 tooth tips to provide heat and wear resistance,
the 3851 is well known for it’s long blade life.
▼
▼