Filter
Top Products
Non-ferrous Cutting
▼ ▼
LARGE &
MEDIUM SOLIDS
SMALL SOLIDS
& BUNDLES
PIPES, PROFILES,
CASTINGS
CONTOURS
▼ ▼
3850 — SANDFLEX
®
Dragon
™
For horizontal machines
• Positive hook toothing for good penetration and chip formation.
• Tough Matrix HSS tooth tips.
• Large gullets for good chip carrying capacity.
DIMENSIONS TEETH TOOTH PRODUCT
MM INCHES PER INCH TYPE CODE
20 x 0.9 3/4 x .035 3 Hook
3850-20-0.9-H-3
27 x 0.9 1 x .035 3 Hook
3850-27-0.9-H-3
Bandmill
34 x 1.1 1-1/4 x .042 1.33 PM
3850-34-1.1-P-1.33
• The PM tooth has a 10° positive rake angle and a gullet with a
large chip capacity.
• This 1.33 TPI is designed for large sections of wood in Bandmill
type machines.
▼
23
Non-ferrous Cutting