Bahco Superior Saw User Manual


  Open as PDF
of 8
 
Selection Table
There are a few things to consider when
selecting the right saw for the job. The following
steps and the table below will help you to
choose. Then complete the selection with other
saw features you prefer.
Contact us if you need more information!
Step 1. Select saw model: Superior, ProfCut or PrizeCut.
Step 2. Select saw according to column 1 – Type of saw/material.
Step 3. Select saw according to application – se column 5 and column 6 (Length).
- Precision work: Use
fine cut saws with small teeth from 9/10 to 15/16 teeth/points per inch.
The length of the saw makes little difference.
- General work: Use
medium cut saws with medium size teeth from 7/8 to 9/10 teeth/points per inch.
The length should be 18-22 inches for vigorous, thrusting strokes.
- Rough work: Use
coarse cut saws with large teeth with 7/8 teeth/points per inch.
The length should be 22-26 inches for long, vigorous strokes.
Superior
GENERAL BLADE HANDLE
Type of Art. code EAN- Pack Application Length Toothing/TPI Low friction Thickness Type
saw/material code Qty in/mm coating of blade
COARSE
2700-24-XT7-HP 7311518191665 4 Timber, wet wood and tanalised 24/600 XT/7 Yes 1.03 mm Ergo, 2 component
COARSE
2700-22-XT7-HP 7311518191672 4 Timber, wet wood and tanalised 22/550 XT/7 Yes 1.03 mm Ergo, 2 component
MEDIUM
2600-22-XT-HP 7311518160777 4 Medium cutting 22/550 XT/9 Yes 1.03 mm Ergo, 2 component
MEDIUM
2600-19-XT-HP 7311518160760 4 Medium cutting 19/475 XT/9 Yes 1.03 mm Ergo, 2 component
Toolbox saw
FINE
2600-16-XT11-HP 7311518239527 4 Toolbox 16/400 XT/11 Yes 1.03 mm Ergo, 2 component
Laminate saw
LAMINATOR
SUP-20-LAM 7311518258351 4 Laminate and wooden floors 20/500 XT/11 Yes 0.93 mm Ergo, 2 component
Small saws
TENON
3180-14-XT11-HP 7311518181390 4 Tenon saw 14/360 XT/11 Yes 0.75 mm Ergo, 2 component
VENEER
3240-14-XT11-HP 7311518243005 4 Veneer saw 14/360 XT/11 Yes 0.75 mm Ergo, 2 component
COMPASS
3150-12-XT9-HP 7311518181406 4 Compass saw 12/300 XT/9 Yes 1.03 mm Ergo, 2 component
ProfCut
GENERAL BLADE HANDLE
Type of Art. code EAN- Pack Application Length Toothing/TPI Low friction Thickness Type
saw/material code Qty in/mm coating of blade
ProfCut
+
base assortment
MEDIUM
PCP-22-GT7 7311518263331 4 Medium cutting 22/550 GT/7 Yes 0.83 mm 2 component
MEDIUM
PCP-19-GT7 7311518263317 4 Medium cutting 19/475 GT/7 Yes 0.83 mm 2 component
FINE
PCP-22-GT9 7311518263348 4 Fine cutting 22/550 GT/9 Yes 0.83 mm 2 component
FINE
PCP-19-GT9 7311518263324 4 Fine cutting 19/475 GT/9 Yes 0.83 mm 2 component
ProfCut base assortment
MEDIUM
PC-22-GT7 7311518263393 4 Medium cutting 22/550 GT/7 No 0.83 mm 2 component
MEDIUM
PC-19-GT7 7311518263362 4 Medium cutting 19/475 GT/7 No 0.83 mm 2 component
FINE
PC-22-GT9 7311518263409 4 Fine cutting 22/550 GT/9 No 0.83 mm 2 component
FINE
PC-19-GT9 7311518263379 4 Fine cutting 19/475 GT/9 No 0.83 mm 2 component
Toolbox saw
FINE
PC-15-TBX 7311518263423 4 Fine cutting/Toolbox 15/380 GT/11 No 0.75 mm 2 component
Small saws
TENON
PC-12-TEN 7311518263447 4 Tenon saw 12/300 UT/11 No 0.75 mm 2 component
VENEER
PC-12-VEN 7311518263430 4 Veneer saw 12/300 UT/11 No 0.75 mm 2 component
COMPASS
PC-12-COM 7311518263454 4 Compass saw 12/300 XT/9 No 1.03 mm 2 component
Fileable saws
MEDIUM
PC-16-FILE-U7 7311518263461 4 Medium cutting/Fileable 16/400 UT/7 Fileable No 0.83 mm 2 component
MEDIUM
PC-19-FILE-U7 7311518263478 4 Medium cutting/Fileable 19/475 UT/7 Fileable No 0.83 mm 2 component
MEDIUM
PC-22-FILE-U7 7311518263485 4 Medium cutting/Fileable 22/550 UT/7 Fileable No 0.83 mm 2 component
MEDIUM
PC-24-FILE-U7 7311518263492 4 Medium cutting/Fileable 24/600 UT/7 Fileable No 0.83 mm 2 component
Dove tail saws
DOVE TAIL
PC-10-DTR 7311518263546 10 Dovetail right 10/250 UT/13 No 0.50 mm Wood
DOVE TAIL
PC-10-DTL 7311518263553 10 Dovetail left 10/250 UT/13 No 0.50 mm Wood
DOVE TAIL
PC-10-DTF 7311518263560 10 Dovetail flex 10/250 FT/15 No 0.50 mm Wood
Special application saws
Laminate saw
LAMINATOR
PC-20-LAM 7311518258290 4 Laminate and wooden floors 20/500 XT/11 No 0.93 mm 2 component
Precision saw
PRECISION
PC-20-PRC 7311518264291 4 Mitre/Precision/Fine 20/500 UT/9 No 0.93 mm 2 component
Timber saw
TIMBER
PC-24-TIM 7311518263515 4 Coarse cutting/Fileable 24/600 FT/3.5 Fileable No 0.93 mm 2 component
Plaster saw
PLASTER
PC-24-PLS 7311518263508 4 Plaster 24/600 GT/7 No 0.93 mm 2 component
General purpose saw
GEN. PURPOSE
PC-15-GNP 7311518264307 4 General purpose 15/380 FT/15 No 0.75 mm 2 component
Polystyrene, foam saw
DECOR
PC-16-DECO 7311518264987 4 Polystyrene, foam saw 16/400 Special No 0.75 mm 2 component
Concrete saws
255 7311518007843 1 Concrete/Carbide tip 30/750 30 Carbide tips No 1.6 mm 2 component
255-15/29 7311518007850 1 Concrete/Carbide tip 30/750 15 Carbide tips No 1.6 mm 2 component
Light Concrete saw
256-26 7311518000080 4 Light weight concrete 26/650 Non-Carbide No 1.15 mm 2 component
PrizeCut
GENERAL BLADE HANDLE
Type of Art. code EAN- Pack Application Length Toothing/TPI Low friction Thickness Type
saw/material code Qty in/mm coating of blade
UNIVERSAL
NP-22-U7/8-HP 7311518034399 10 Universal 22/550 UT/7 No 0.83 mm 1 component
UNIVERSAL
NP-19-U7/8-HP 7311518241452 10 Universal 19/475 UT/7 No 0.83 mm 1 component
UNIVERSAL
NP-16-U7/8-HP 7311518241773 4 Universal 16/400 UT/7 No 0.83 mm 1 component
Small saws
TENON
NP-12-TEN 7311518263959 10 Tenon saw 12/300 UT/13 No 0.75 mm 1 component
VENEER
NP-12-VEN 7311518264260 4 Veneer saw 12/300 UT/13 No 0.75 mm 1 component
COMPASS
NP-12-COM 7311518264277 4 Compass saw 12/300 UT/7 No 1.20 mm 1 component
General purpose saw
FINE
300-14-F15/16-HP 7311518005955 4 General purpose 14/360 FT/15 No 0.75 mm 1 component
Concrete saws
NP-CONC 7311518264918 4 Concrete/Carbide tip 25/620 34 Carbide tips No 2.00 mm Wood
NP-CONC-17/34 7311518264925 4 Concrete/Carbide tip 25/620 17 Carbide tips No 2.00 mm Wood
 previous