Banner EZ-ARRAY Stud Sensor User Manual


 
Park Lane, Culliganlaan 2F
1831 Diegem • Belgium
Tel: +32 2 456 07 80
Fax: +32 2 456 07 89
E-mail: mail@bannereurope.com
Web: www.bannereurope.com
BANNER ENGINEERING EUROPE
E-A080 – 01/2007
Authorised distributor:
SAFETYSENSORS VISION
Objective: Measure height, length and width of boxes for
storage and collect profile information for shipping.
Description: The boxes pass through vertical, horizontal
or perpendicular mounted EZ-ARRAY pairs to determine
where the proper storage location should be.
Box Profiling
Objective: Determine tyre size on a conveyor.
Description: The outer and inner diameter of each tyre is
determined. The controller determines if the tyre is one of
two required sizes, and directs it down the corresponding
conveyor. If the tyre is found to be of neither size, it is sent
to a reject bin.
Tyre Sorting
Objective: Determine the diameter of a log before it has
entered a station used for bark removal.
Description: An EZ-ARRAY determines the diameter of
the log by the total number of beams blocked, to adjust the
log grippers and bark removing blades for process stability.
Log Diameter
3-Digit
Diagnostic
Display
Bi-Colour
Zone
Indicators
Dip Switch
Configuration
Alignment/
Blanking
System Status
Modbus Activity
Modbus Error
Included software contains
more advanced settings
M12x1 Connector