Filter
Top Products
U-GAGE
®
Q45UR: Ultra-accurate gauging in compact remote sensing packages.
U-GAGE
®
Q45UR: Ultra-accurate gauging in compact remote sensing packages.
10
Precise discrete or analog sensing for hard-to-access and
difficult applications.
With all the advanced features of the standard Q45U, the Q45UR adds
the convenience of a choice of three remote sensing heads to access
applications with limited space or difficult environments. High-precision
discrete output models can resolve object presence within 0.6 mm at
any point from 50 mm to 250 mm with exceptional sensing repeatability:
±0.2% of the sensing distance set point. Analog models feature 0.1 mm
to 0.5 mm resolution, with a sensing range of 50 mm to 250 mm.
Discrete output models are Bipolar, NPN and PNP, and analog output
models are selectable for 0 to 10V dc or 4 to 20 mA output.
Set your own custom sensing “windows” with the push of a button.
With Banner’s push-button programming, you can set your own custom
sensing “windows.” On discrete output models, you can set an automatic
sensing “window” size of 1, 2, 3, or 4 mm with DIP switches. The
sensing distance setpoint, programmed using the push button, becomes
the center point of the window. Both discrete and analog Q45UR
sensors also allow users to define a custom sensing window ranging
from 5 mm to 200 mm and both models have selectable response
modes and speeds. The analog output can be set to a positive or
negative slope and output response speed is set using the single-turn
potentiometer (analog models) or DIP switch (discrete models).
Advanced diagnostics and
temperature compensation.
Three LEDs continuously display
programming and operating
status. The red LED flashes in
direct proportion to the received
signal strength, to assist in
alignment. A yellow LED
indicates the target is in the
operating window limits and
OUTPUTS CONDUCTING.
All models also feature a highly
visible, 5-segment, moving-dot
red LED, which indicates the
relative position of the target within the sensing window. Thermistors in
the remote sensing heads compensate for temperature variations,
assuring superior accuracy at the sensing point.
18 mm barrels, or compact
cubical sensing heads.
The rugged remote sensor heads are available in either a stainless
steel or plastic 18 mm diameter threaded barrel housing, or an
ultra-compact, Flat-Pak plastic model. They all feature a tough
ceramic transducer, and are rated IEC IP65 and NEMA 4. They have a
wide operating temperature range: -25° to +70°C (-13° to +158°F).
Models Cable Sensor Head
Q45UR Model Selection
Includes one controller and one sensor head.
*9 m (30') cables are available by adding suffix “w/30” to the model number
of a cabled sensor (e.g., Q45UR3BA63CK w/30).
** A model with a quick-disconnect (QD) connector requires a mating cable,
see page 15 for a partial listing of available cables.
Q45UR3BA63CK
Q45UR3BA63CQK
Q45UR3BA63CQ6K
Q45UR3BA63CKS
Q45UR3BA63CQKS
Q45UR3BA63CQ6KS
Q45UR3BA63CKQ
Q45UR3BA63CQKQ
Q45UR3BA63CQ6KQ
Q45UR3LIU64CK
Q45UR3LIU64CQK
Q45UR3LIU64CQ6K
Q45UR3LIU64CKS
Q45UR3LIU64CQKS
Q45UR3LIU64CQ6KS
Q45UR3LIU64CKQ
Q45UR3LIU64CQKQ
Q45UR3LIU64CQ6KQ
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
2 m (6.5')*
5-Pin Mini-style QD**
5-Pin Euro-style QD**
Analog Output
Discrete Output
18 mm
Stainless Steel
Barrel
18 mm Plastic
Barrel
Flat-Pak
Plastic
Cubical
18 mm
Stainless Steel
Barrel
18 mm Plastic
Barrel
Flat-Pak
Plastic
Cubical