Beko BC73 F Saw User Manual


 
TEMPERATURE CONTROL AND ADJUSTMENT
Operating temperatures are controlled by the thermostat knob (see diagram)
located on the ceiling of fridge compartment. Settings may be made from 1 to
5, 5 being the coldest position.
When the appliance is switched on for the first time, the thermostat should be
adjusted so that after 24 hours, the average fridge temperature is no higher
than +5°C (+41°F). We recommend you set the thermostat half way between
the 1 and 5 setting and monitor to obtain the desired temperature i. e. towards
5 you will obtain a colder fridge temperature and vice versa. Some sections of
the fridge may be cooler or warmer ( such as the salad crisper and the top part
of the cabinet ) which is quite normal.
The normal storage temperature of the freezer should be -18°C (0°F). Lower
temperatures may be obtained by adjusting thermostat knob towards 5 position.
We recommend that you check the temperature with an accurate thermometer
to ensure that the storage compartments are kept to the desired temperature.
Remember you must take your reading very quickly since the thermometer
temperature will rise very rapidly after you remove it from the freezer.
Please remember each time the door is opened cold air escapes and the internal
temperature rises. Therefore never leave the door open and ensure it is closed
immediately after food is put in or removed.
In case of a temporary ice build up in the fridge compartment, reduce the
thermostat setting to 1, monitoring at the same time that the fridge
temperature is maximum +5 degrees C [41 degrees F]. Once the ice build
up disappears and the appliance starts auto defrosting again as normal,
then you may increase the thermostat setting, if required.
8