Filter
Top Products
VoIP/(802.11g) ADSL2+ Router
Chapter 4: Configuration
Device Management
The Device Management advanced configuration settings allow you to control your router’s
security options and device monitoring features.
Embedded Web Server
HTTP Port: This is the port number the router’s embedded web server (for web-based
configuration) will use. The default value is the standard HTTP port, 80. Users may specify an
alternative if, for example, they are running a web server on a PC within their LAN.
Management IP Address: You may specify an IP address allowed to logon and access the
router’s web server. Setting the IP address to 0.0.0.0 will disable IP address restrictions,
allowing users to login from any IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user’s
configuration session.
For Example: User A changes HTTP port number to 100, specifies their own IP address of
192.168.1.55, and sets the logout time to be 100 seconds. The router will only allow User A
access from the IP address 192.168.1.55 to logon to the Web GUI by typing:
http://192.168.1.254:100 in their web browser. After 100 seconds, the device will automatically
logout User A.
108