Filter
Top Products
VoIP/(802.11g) ADSL2+ Router
Chapter 3: Basic Installation
11
Connecting your router
1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.
4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.
5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack.
(
802.11
g
is not supported in BiPAC 7401VP
)
Connect more
com
p
uters
Analo
g
Phone
ADSL
S
p
litte
r
ADSL Phone
Line
Switching/
HUB