Filter
Top Products
Part No 440021 Form No F071307B
11
FORCE BLOWER Owner’s Manual
ADJUSTING AIR DIRECTOR
To adjust air direction, squeeze Aim-N-Shoot
TM
control lever. When you want to blow debris at the same angle for an
extended period, choose a suitable position and use the finger controlled push button lock to lock the cone in position.
For operations that do not require the use of the Aim-N-Shoot
TM
feature the manual adjustment knob, pictured below, can
be used to permanently lock the cone into position. NOTE: be sure to release the knob when returning to using the Aim-
N-Shoot
TM
.
DO NOT position director cone to where it will blow debris towards people, vehicles or other objects in vicinity. Flying
debris may damage, harm, or cause injury to people or objects in air flow range.
FRONT DIVERTER POSITIONING
The removable front diverter adapter can be slipped on to direct the air stream forward. First turn off engine, and then
simply slide diverter onto cone following guide points and twist till locked in position. This option is extremely useful for
cleaning out long cracks in pavement or for cleaning under bushes, building overhangs or along curbs.
WARNING: Unit will be more difficult to control due to the air exiting the unit. Keep hands on the unit at all times when
using the front diverter. To reduce resistance when attaching the diverter, use a silicone lubricant spray on the locking
grooves. This should allow the diverter to slide into position with more ease.
Manual Adjustment
knob
Front diverter